收藏本站 提供:电热管价格和电热管规格型号大全,还提供电热管接线、选型的问题,特耐佳电加热器高端电热供应商。

不锈钢电加热管使用维护及注意事项

型号:未知

报价:面议

联系电话:051257123258

产品介绍

用户评价

今日出厂产品展示及部分报价

1、外形尺寸图中尺寸“B”必须全部浸入油中免烧坏元件。不锈钢电热管被加热油应无腐蚀性。
1, size dimension “B” must be completely immersed in the oil burning free bad elements. Stainless steel electric heating tube is heated oil should be no corrosive.
2、SRY3型的工作液面必须在紧固件之下,尺寸线“B”之上。
Working level 2, SRY3 must be in the fastener, the dimension line “B”.
3、熔化沥青、石蜡等固态油类时应降低电压使用,等熔化后再升至额定电压。以防止电量集中降低元件使用寿命。
3, melting asphalt, paraffin solid oils should reduce the voltage used to melt, then to the rated voltage. To prevent energy concentration reducing component life.
4、发现电加热管管子表面有结碳时,必须除尽后再用,以免降低效率,甚至烧坏元件。
4, found that the electric heating tube surface with carbon, to eliminate after use, so as not to reduce efficiency, and even burned element.
5、元件应存放于干燥外,若因长期放置而绝缘电阻降到低于1兆欧时,可在200℃左右的烘箱中干燥若干小时(或将元件低压通过数小时),即或恢复绝缘电阻。
5, elements must be stored in a dry, if the long-term placement and insulation resistance is reduced to less than 1000000000000 in Europe, but in the oven at 200 ℃ drying in several hours (or low pressure through hours), or restoring insulation resistance.

相关产品

*

*

051257123258