收藏本站 提供:电热管价格和电热管规格型号大全,还提供电热管接线、选型的问题,特耐佳电加热器高端电热供应商。

耐腐蚀单头电热管

型号:未知

报价:面议

联系电话:051257123258

产品介绍

用户评价

今日出厂产品展示及部分报价

产品详细介绍
Product details
一、耐腐蚀单头电热管概述
A single head electric heat pipe, corrosion resistance of
耐腐蚀单头电热管结构:以抗腐蚀金属管(通常选

汽车模具加热管|电热管|单头电热管

汽车模具加热管|电热管|单头电热管

用钛材)作元件外套管。接线端部采用耐腐蚀橡塑合成材料模压而成。 用途:广泛用于海水养殖、化工、野外作业。 电压:110-440V 功率:≤10KW/支 推荐规格:16︿25×100︿1000
Corrosion resistant single head electric heat pipe structure: corrosion resistant metal tube (usually choose titanium) elements jacket pipe. The terminal uses the corrosion resistant synthetic rubber material molding. Application: widely used in aquaculture, chemical, field operation. Voltage: 110-440V power: ≤ 10KW/ a recommended specification: 16 * 100 ^ 1000 ^ 25
二、耐腐蚀单头电热管防腐方式
Two, corrosion resistant single head electric heat pipe anticorrosion method
防腐电热管通常采用四种方式:一外壳采用防腐金属钛材,二外壳采用316L不锈钢,三在普通金属材料外面加套一层高防腐性能的聚四氟乙烯套管,四普通金属管外表面烧结一层耐温耐腐蚀的陶瓷材料.
Anticorrosive electric heating tube is usually used in four ways: a shell made of anticorrosive metal titanium, two shell is made of 316L stainless steel, PTFE sleeve three and a high corrosion resistance in the outside of common metal materials, ceramic materials four ordinary metal tube outer surface of sintering layer temperature corrosion.
钛管防腐电热管防腐能力强,质量密度小,重量轻,但价格高,功率密度大,常用规格,管径10mm及12mm,正常设计功率500W-2000W每米.
Titanium pipe anticorrosive electric heating tube with strong anti-corrosion ability, quality of small density, light weight, high price, high power density, common specifications, diameter of 10mm and 12mm, the normal design of 500W-2000W power per meter.
316L防腐电热管防腐能力一般, 价格适中,功率密度大,常用规格,管径10mm及12mm,正常设计功率500W-2000W每米.
316L anticorrosive electric heating pipe anticorrosion ability in general, moderate price, high power density, common specifications, diameter of 10mm and 12mm, the normal design of 500W-2000W power per meter.
三、耐腐蚀单头电热管发热量的计算
The calculation of three, corrosion resistant single head electric heat pipe heat
可以用调压器通过改变输入电压和电流来改变发热量。发热量与电压平方成正比,与电流平方成正比;电压变为原来的1/2时,发热量变为1/4;电流变为原来的1/2时,发热量也变为1/4。
By changing the input voltage and current to change heat with pressure regulator. Heat is proportional to the square of the voltage, and the current proportional to the square; voltage into the original 1/2, into 1/4 calorific value; current into the original 1/2, heat is changed to 1/4.
四、耐腐蚀单头电热管的优点
Four, good corrosion single head electric heat pipe
1、直径小,可以做到3-25MM。
1, small diameter, can do 3-25MM.
2、长度不受限制,可以做到20-2000MM。
2, the length of the restriction, can do 20-2000MM.
3、功率高,可以做到(表面积20瓦特/平方厘米),国外甚至可以做到(表面积60瓦特/平方厘米)。
3, high power, can do (surface area 20 Watt / cm2), and even abroad, can do (surface area 60 Watt / cm2).
五、耐腐蚀单头电热管的性能要求
Five, single head electric heat pipe corrosion resistant performance requirements
1 泄露电流
1 leakage current
冷态泄露电流以及水压和密封试验后泄露电流应不超过0.5mA
The cold leak current and water pressure and seal leak current after test should not exceed 0.5mA
2 多个元件串联到电源中时,应以这一组元件为整体进行泄露电流试验。
More than 2 elements in series to power, should be in this group of components for the overall leak current test.
3 经受通断电的能力 元件应能在规定的试验条件下经历2000次通断电试验,而不发生损坏
3 to pass power capacity component should be able to experience the 2000 on-off test in the test of the prescribed conditions, without the risk of damage

相关产品

*

*

051257123258