收藏本站 提供:电热管价格和电热管规格型号大全,还提供电热管接线、选型的问题,特耐佳电加热器高端电热供应商。

方筒加热器,矩形的插入器

型号:未知

报价:面议

联系电话:051257123258

产品介绍

用户评价

今日出厂产品展示及部分报价

方筒加热器–描述
NPH的方筒式加热器提供了一个有效的成本,为各种标准和特殊工艺加热的要求,高性能的解决方案。正方形配置

高温炉|退火炉|隧道炉|陶瓷加热器|加热管

高温炉|退火炉|隧道炉|陶瓷加热器|加热管

多功能,可靠和成本效益
方形盒器卡入槽表面研磨工具的使用变得特别有效的成本随着现代数控加工的到来。
平方器卡入铣槽紧密provideoptimum热传递到应用,允许容易去除清洗或维修系统加热器。锻造方筒加热器提供4瓦特密度的5倍,目前的方形和矩形盒和带加热器允许使用更小的和加热器的应用较少,每。对于一个给定的投影面积上的加热板表面,一个适当的卡方筒可以供应高达百分之25的高功率比圆形盒。
万能铣槽的安装方法可以使退出应用程序在任何所需的位置和允许从多个加热器导致路由到一个单一的出口面积。温度传感器,可以直接纳入加热器安装系统,减少在单个和多个分区加热应用布线复杂度。加热器导致终止区可以很容易地分离出潜在的污染物和受虐待。加热特性可以通过在只有很少的修改模具关键位置添加加热器或额外的控制区域调整。异形曲面和不规则形状的均匀加热是很容易通过铣槽方形盒安装方法。
方筒加热器安装在铝,黄铜或青铜块可以替代许多昂贵的铸造加热器配置要求延长交货时间。在损坏的组件的事件可以被修复而不是被取代。
方筒加热器标准,特殊目的和定制生产。
NPH平方挤压筒的设计和制造过程中与在标准和NPH方筒式加热器的面向应用的版本提供快速交货。

Square Cartridge Heaters–Description

The NPH square cartridge heater provides a cost effective, high performance solution for a variety of standard and special process heating requirements. The square configuration

simplifies wiring and installation while optimizing performance in a wide range of solid, liquid, and gas heating applications. Tooling applications are particularly well served by the square cartridge heater approach. Typical square cartridge heating applications include platens, molds, sealing bars, sealing plates and dies. Versatile slot style mounting simplifies installation in small tooling components such as bushings and nozzles and is particularly useful when leads must exit at a specific location on the component surface.

 

Versatile, Reliable and Cost Effective

The use of square cartridge heaters clamped into milled slots on the tool surface has become particularly cost effective with the advent of modern CNC machining.

 

Square heaters clamped into close fitting milled slots provideoptimum heat transfer to the application while permitting easy heater removal for system cleaning or maintenance. Swaged square cartridge heaters provide 4 to 5 times the watt density of current square and rectangular cartridge and strip heaters allowing use of smaller and fewer heaters per application. For a given projected heater area on a plate surface, a properly clamped square cartridge can supply as much as 25 percent higher wattage than a round cartridge.

 

The versatile milled slot mounting method allows heater leads to exit the application at any desired location and permits routing of leads from multiple heaters to a single exit area. Temperature sensors and leads can be incorporated directly into the heater mounting system, reducing wiring complexity in both single and multiple zoned heating applications. Heater lead termination areas can be readily isolated from potential contaminants and protected from physical abuse. Heating characteristics can be adjusted by adding heaters or additional control zones at key locations with only minimal tooling modification. Uniform heating of profiled surfaces and irregular shapes is easily accomplished using the milled slot square cartridge mounting method.

 

Square cartridge heaters installed in aluminum, brass or bronze blocks can readily replace many costly cast heater configurations requiring extended delivery time. In the event of damage the assembly can be repaired rather than replaced.

 

Square Cartridge Heaters – Standard, Special Purpose and Custom Manufactured.

 

The NPH square swaged cartridge design and manufacturing process is geared to provide quick delivery on both standard and application oriented versions of the NPH square cartridge heater.

上一篇:

下一篇:

相关产品

*

*

051257123258