收藏本站 提供:电热管价格和电热管规格型号大全,还提供电热管接线、选型的问题,特耐佳电加热器高端电热供应商。

Immersion Heaters

型号:未知

报价:面议

联系电话:051257123258

产品介绍

用户评价

今日出厂产品展示及部分报价

Immersion Heaters
加热液体,空气和气体
股票的标准尺寸大的选择
定制设计
材料包括铜,不锈钢系列,耐酸钢和钛
各种各样的奶嘴,包括G,R,BSP和公制螺纹
多种法兰根据DIN标准,三角支架,或定制的解决方案
优势
浸入式加热器的插头元件通常是热几乎每一种液体的最有效的解决方案,空气和气体。水,蒸汽,油,粘子的立场,碱或酸性的解决方案只是其中的一些例子。热的传递是通过加热器和介质之间的直接接触。由于这一点,可以实现非常有效的温度控制,它也提供了一个具有成本效益的加热。浸入式加热器的插头元件被用来作为热水器,热源主要电器,工业锅炉,浴室,充油散热器,散热器,IHP `等的插头元件和浸入式加热器也提供ATEX和EX版本。
建设
IHP `的浸入式加热器的插头元件可在各种材料和额定功率。常用的材料有铜(Cu),不锈钢(AISI 304,AISI 316L不锈钢,AISI 321,SMO,Incoloy®),钛(Ti)。浸入式加热器的构造形成管状元件,焊接或焊接和安装一个接头,法兰或其他元素的头。乳头线可能是G型,R,BSP或公制。法兰通常是根据DIN标准的选择,但也可以是三角形的或所需的。浸没式加热器可以安装温度传感器,口袋热状态,过温保护,可以安装接线盒。

 

Properties

  • For heating liquids, air and gases
  • Large selection of in-stock standard sizes
  • Customized designs
  • Wide range of materials including Copper, Stainless Steel, Acid resistant Steel and Titanium
  • A variety of nipples including G, R, BSP and metric threads
  • A variety of Flanges according to DIN standard, Triangle brackets, or customized solutions

Advantages
Immersion heaters and plug elements are often the most effective solution to heat almost every conceivable liquid, air and gas. Water, Steam, Oils, viscous sub-stances, Caustic or Acidic solutions are just some examples. The transfer of heat is via direct contact between the heater and the medium. Thanks to this, one can achieve a very effective temperature control, which also provides a cost-effective heating. Immersion heaters and plug elements are used as a heat source in Hot water heaters, major appliances, Boilers, industrial baths, oil filled radiators, towel warmers, etc. IHP`s plug elements and immersion heaters are also supplied in ATEX and Ex-versions.

Construction
IHP`s immersion heaters and plug elements are available in a variety of materials and power ratings. Commonly used materials are Copper (Cu), Stainless Steel (AISI 304, AISI 316L, AISI 321, SMO, Incoloy ®), Titanium (Ti) .An Immersion Heater is constructed of tubular elements formed, soldered or welded and fitted with a nipple, flange or other element head. The nipple threads may be of the type G, R, BSP or metric. The flange is usually selected according to the DIN standard, but can also be triangular or as desired. The immersion heater can then be fitted with pockets for Temperature Sensors, Thermo-stats, Over temperature protection and can be fitted with Connection Box.

相关产品

*

*

051257123258